--- /dev/null
+// This config is in the KDL format: https://kdl.dev
+// "/-" comments out the following node.
+
+input {
+ keyboard {
+ xkb {
+ // You can set rules, model, layout, variant and options.
+ // For more information, see xkeyboard-config(7).
+
+ // For example:
+ // layout "us,ru"
+ // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps"
+ }
+
+ // You can set the keyboard repeat parameters. The defaults match wlroots and sway.
+ // Delay is in milliseconds before the repeat starts. Rate is in characters per second.
+ // repeat-delay 600
+ // repeat-rate 25
+
+ // Niri can remember the keyboard layout globally (the default) or per-window.
+ // - "global" - layout change is global for all windows.
+ // - "window" - layout is tracked for each window individually.
+ // track-layout "global"
+ }
+
+ // Next sections include libinput settings.
+ // Omitting settings disables them, or leaves them at their default values.
+ touchpad {
+ tap
+ // dwt
+ natural-scroll
+ // accel-speed 0.2
+ // accel-profile "flat"
+ // tap-button-map "left-middle-right"
+ }
+
+ mouse {
+ // natural-scroll
+ // accel-speed 0.2
+ // accel-profile "flat"
+ }
+
+ tablet {
+ // Set the name of the output (see below) which the tablet will map to.
+ // If this is unset or the output doesn't exist, the tablet maps to one of the
+ // existing outputs.
+ map-to-output "eDP-1"
+ }
+
+ // By default, niri will take over the power button to make it sleep
+ // instead of power off.
+ // Uncomment this if you would like to configure the power button elsewhere
+ // (i.e. logind.conf).
+ // disable-power-key-handling
+}
+
+// You can configure outputs by their name, which you can find
+// by running `niri msg outputs` while inside a niri instance.
+// The built-in laptop monitor is usually called "eDP-1".
+// Remember to uncommend the node by removing "/-"!
+/-output "eDP-1" {
+ // Uncomment this line to disable this output.
+ // off
+
+ // Scale is a floating-point number, but at the moment only integer values work.
+ scale 2.0
+
+ // Resolution and, optionally, refresh rate of the output.
+ // The format is "<width>x<height>" or "<width>x<height>@<refresh rate>".
+ // If the refresh rate is omitted, niri will pick the highest refresh rate
+ // for the resolution.
+ // If the mode is omitted altogether or is invalid, niri will pick one automatically.
+ // Run `niri msg outputs` while inside a niri instance to list all outputs and their modes.
+ mode "1920x1080@144"
+
+ // Position of the output in the global coordinate space.
+ // This affects directional monitor actions like "focus-monitor-left", and cursor movement.
+ // The cursor can only move between directly adjacent outputs.
+ // Output scale has to be taken into account for positioning:
+ // outputs are sized in logical, or scaled, pixels.
+ // For example, a 3840×2160 output with scale 2.0 will have a logical size of 1920×1080,
+ // so to put another output directly adjacent to it on the right, set its x to 1920.
+ // It the position is unset or results in an overlap, the output is instead placed
+ // automatically.
+ position x=1280 y=0
+}
+
+layout {
+ // You can change how the focus ring looks.
+ focus-ring {
+ // Uncomment this line to disable the focus ring.
+ // off
+
+ // How many logical pixels the ring extends out from the windows.
+ width 4
+
+ // Color of the ring on the active monitor: red, green, blue, alpha.
+ active-color 127 200 255 255
+
+ // Color of the ring on inactive monitors: red, green, blue, alpha.
+ inactive-color 80 80 80 255
+ }
+
+ // You can also add a border. It's similar to the focus ring, but always visible.
+ border {
+ // The settings are the same as for the focus ring.
+ // If you enable the border, you probably want to disable the focus ring.
+ off
+
+ width 4
+ active-color 255 200 127 255
+ inactive-color 80 80 80 255
+ }
+
+ // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
+ preset-column-widths {
+ // Proportion sets the width as a fraction of the output width, taking gaps into account.
+ // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
+ // The default preset widths are 1/3, 1/2 and 2/3 of the output.
+ proportion 0.25
+ proportion 0.33333
+ proportion 0.5
+ proportion 0.66667
+
+ // Fixed sets the width in logical pixels exactly.
+ // fixed 1920
+ }
+
+ // You can change the default width of the new windows.
+ default-column-width { proportion 0.5; }
+ // If you leave the brackets empty, the windows themselves will decide their initial width.
+ // default-column-width {}
+
+ // Set gaps around windows in logical pixels.
+ gaps 24
+
+ // Struts shrink the area occupied by windows, similarly to layer-shell panels.
+ // You can think of them as a kind of outer gaps. They are set in logical pixels.
+ // Left and right struts will cause the next window to the side to always be visible.
+ // Top and bottom struts will simply add outer gaps in addition to the area occupied by
+ // layer-shell panels and regular gaps.
+ struts {
+ left 0
+ right 0
+ top 8
+ bottom 8
+ }
+
+ // When to center a column when changing focus, options are:
+ // - "never", default behavior, focusing an off-screen column will keep at the left
+ // or right edge of the screen.
+ // - "on-overflow", focusing a column will center it if it doesn't fit
+ // together with the previously focused column.
+ // - "always", the focused column will always be centered.
+ center-focused-column "on-overflow"
+}
+
+// Add lines like this to spawn processes at startup.
+// Note that running niri as a session supports xdg-desktop-autostart,
+// which may be more convenient to use.
+// spawn-at-startup "alacritty" "-e" "fish"
+
+cursor {
+ // Change the theme and size of the cursor as well as set the
+ // `XCURSOR_THEME` and `XCURSOR_SIZE` env variables.
+ xcursor-theme "breeze_cursors"
+ xcursor-size 28
+}
+
+// Uncomment this line to ask the clients to omit their client-side decorations if possible.
+// If the client will specifically ask for CSD, the request will be honored.
+// Additionally, clients will be informed that they are tiled, removing some rounded corners.
+prefer-no-csd
+
+// You can change the path where screenshots are saved.
+// A ~ at the front will be expanded to the home directory.
+// The path is formatted with strftime(3) to give you the screenshot date and time.
+screenshot-path "~/Bilder/niri/scrot %Y-%m-%d %H-%M-%S.png"
+
+// You can also set this to null to disable saving screenshots to disk.
+// screenshot-path null
+
+// Settings for the "Important Hotkeys" overlay.
+hotkey-overlay {
+ // Uncomment this line if you don't want to see the hotkey help at niri startup.
+ // skip-at-startup
+}
+
+binds {
+ // Keys consist of modifiers separated by + signs, followed by an XKB key name
+ // in the end. To find an XKB name for a particular key, you may use a program
+ // like wev.
+ //
+ // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt
+ // when running as a winit window.
+
+ // Mod-Shift-/, which is usually the same as Mod-?,
+ // shows a list of important hotkeys.
+ Mod+Shift+Slash { show-hotkey-overlay; }
+
+ // Suggested binds for running programs: terminal, app launcher, screen locker.
+ Mod+Return { spawn "foot"; }
+ Mod+R { spawn "fuzzel"; }
+ Ctrl+Alt+L { spawn "swaylock" "-i" "/home/andy/Bilder/Wallpapers/deep-blue-sea-5120x1440.jpg"; }
+
+ // You can also use a shell:
+ // Mod+T { spawn "bash" "-c" "notify-send hello && exec foot"; }
+
+ // Example volume keys mappings for PipeWire & WirePlumber.
+ XF86AudioRaiseVolume { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1+"; }
+ XF86AudioLowerVolume { spawn "wpctl" "set-volume" "@DEFAULT_AUDIO_SINK@" "0.1-"; }
+
+ Mod+Q { close-window; }
+
+ Mod+Left { focus-column-left; }
+ Mod+Down { focus-window-down; }
+ Mod+Up { focus-window-up; }
+ Mod+Right { focus-column-right; }
+ Mod+H { focus-column-left; }
+ Mod+J { focus-window-down; }
+ Mod+K { focus-window-up; }
+ Mod+L { focus-column-right; }
+
+ Mod+Ctrl+Left { move-column-left; }
+ Mod+Ctrl+Down { move-window-down; }
+ Mod+Ctrl+Up { move-window-up; }
+ Mod+Ctrl+Right { move-column-right; }
+ Mod+Ctrl+H { move-column-left; }
+ Mod+Ctrl+J { move-window-down; }
+ Mod+Ctrl+K { move-window-up; }
+ Mod+Ctrl+L { move-column-right; }
+
+ // Alternative commands that move across workspaces when reaching
+ // the first or last window in a column.
+ // Mod+J { focus-window-or-workspace-down; }
+ // Mod+K { focus-window-or-workspace-up; }
+ // Mod+Ctrl+J { move-window-down-or-to-workspace-down; }
+ // Mod+Ctrl+K { move-window-up-or-to-workspace-up; }
+
+ Mod+Home { focus-column-first; }
+ Mod+End { focus-column-last; }
+ Mod+Ctrl+Home { move-column-to-first; }
+ Mod+Ctrl+End { move-column-to-last; }
+
+ Mod+Shift+Left { focus-monitor-left; }
+ Mod+Shift+Down { focus-monitor-down; }
+ Mod+Shift+Up { focus-monitor-up; }
+ Mod+Shift+Right { focus-monitor-right; }
+ Mod+Shift+H { focus-monitor-left; }
+ Mod+Shift+J { focus-monitor-down; }
+ Mod+Shift+K { focus-monitor-up; }
+ Mod+Shift+L { focus-monitor-right; }
+
+ Mod+Shift+Ctrl+Left { move-column-to-monitor-left; }
+ Mod+Shift+Ctrl+Down { move-column-to-monitor-down; }
+ Mod+Shift+Ctrl+Up { move-column-to-monitor-up; }
+ Mod+Shift+Ctrl+Right { move-column-to-monitor-right; }
+ Mod+Shift+Ctrl+H { move-column-to-monitor-left; }
+ Mod+Shift+Ctrl+J { move-column-to-monitor-down; }
+ Mod+Shift+Ctrl+K { move-column-to-monitor-up; }
+ Mod+Shift+Ctrl+L { move-column-to-monitor-right; }
+
+ // Alternatively, there are commands to move just a single window:
+ // Mod+Shift+Ctrl+Left { move-window-to-monitor-left; }
+ // ...
+
+ Mod+Page_Down { focus-workspace-down; }
+ Mod+Page_Up { focus-workspace-up; }
+ Mod+U { focus-workspace-down; }
+ Mod+I { focus-workspace-up; }
+ Mod+Ctrl+Page_Down { move-column-to-workspace-down; }
+ Mod+Ctrl+Page_Up { move-column-to-workspace-up; }
+ Mod+Ctrl+U { move-column-to-workspace-down; }
+ Mod+Ctrl+I { move-column-to-workspace-up; }
+
+ // Alternatively, there are commands to move just a single window:
+ // Mod+Ctrl+Page_Down { move-window-to-workspace-down; }
+ // ...
+
+ Mod+Shift+Page_Down { move-workspace-down; }
+ Mod+Shift+Page_Up { move-workspace-up; }
+ Mod+Shift+U { move-workspace-down; }
+ Mod+Shift+I { move-workspace-up; }
+
+ Mod+1 { focus-workspace 1; }
+ Mod+2 { focus-workspace 2; }
+ Mod+3 { focus-workspace 3; }
+ Mod+4 { focus-workspace 4; }
+ Mod+5 { focus-workspace 5; }
+ Mod+6 { focus-workspace 6; }
+ Mod+7 { focus-workspace 7; }
+ Mod+8 { focus-workspace 8; }
+ Mod+9 { focus-workspace 9; }
+ Mod+Ctrl+1 { move-column-to-workspace 1; }
+ Mod+Ctrl+2 { move-column-to-workspace 2; }
+ Mod+Ctrl+3 { move-column-to-workspace 3; }
+ Mod+Ctrl+4 { move-column-to-workspace 4; }
+ Mod+Ctrl+5 { move-column-to-workspace 5; }
+ Mod+Ctrl+6 { move-column-to-workspace 6; }
+ Mod+Ctrl+7 { move-column-to-workspace 7; }
+ Mod+Ctrl+8 { move-column-to-workspace 8; }
+ Mod+Ctrl+9 { move-column-to-workspace 9; }
+
+ // Alternatively, there are commands to move just a single window:
+ // Mod+Ctrl+1 { move-window-to-workspace 1; }
+
+ Mod+Comma { consume-window-into-column; }
+ Mod+Period { expel-window-from-column; }
+
+ Mod+V { switch-preset-column-width; }
+ Mod+F { maximize-column; }
+ Mod+Shift+F { fullscreen-window; }
+ Mod+C { center-column; }
+
+ // Finer width adjustments.
+ // This command can also:
+ // * set width in pixels: "1000"
+ // * adjust width in pixels: "-5" or "+5"
+ // * set width as a percentage of screen width: "25%"
+ // * adjust width as a percentage of screen width: "-10%" or "+10%"
+ // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
+ // set-column-width "100" will make the column occupy 200 physical screen pixels.
+ Mod+Minus { set-column-width "-10%"; }
+ Mod+Equal { set-column-width "+10%"; }
+
+ // Finer height adjustments when in column with other windows.
+ Mod+Shift+Minus { set-window-height "-10%"; }
+ Mod+Shift+Equal { set-window-height "+10%"; }
+
+ // Actions to switch layouts.
+ // Note: if you uncomment these, make sure you do NOT have
+ // a matching layout switch hotkey configured in xkb options above.
+ // Having both at once on the same hotkey will break the switching,
+ // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
+ // Mod+Space { switch-layout "next"; }
+ // Mod+Shift+Space { switch-layout "prev"; }
+
+ Print { screenshot; }
+ Ctrl+Print { screenshot-screen; }
+ Alt+Print { screenshot-window; }
+
+ Mod+Shift+E { quit; }
+ Mod+Shift+P { power-off-monitors; }
+
+ Mod+Shift+Ctrl+T { toggle-debug-tint; }
+}
+
+// Settings for debugging. Not meant for normal use.
+// These can change or stop working at any point with little notice.
+debug {
+ // Make niri take over its DBus services even if it's not running as a session.
+ // Useful for testing screen recording changes without having to relogin.
+ // The main niri instance will *not* currently take back the services; so you will
+ // need to relogin in the end.
+ // dbus-interfaces-in-non-session-instances
+
+ // Wait until every frame is done rendering before handing it over to DRM.
+ // wait-for-frame-completion-before-queueing
+
+ // Enable direct scanout into overlay planes.
+ // May cause frame drops during some animations on some hardware.
+ // enable-overlay-planes
+
+ // Disable the use of the cursor plane.
+ // The cursor will be rendered together with the rest of the frame.
+ // disable-cursor-plane
+
+ // Slow down animations by this factor.
+ // animation-slowdown 3.0
+
+ // Override the DRM device that niri will use for all rendering.
+ // render-drm-device "/dev/dri/renderD129"
+}
--- /dev/null
+#!/usr/bin/env bash
+
+logger '======================='
+logger 'NIRI MAIN STARTUP BEGIN'
+
+MAKOCONFIG="/home/andy/.config/mako/config"
+
+if [[ ! -d "$XDG_RUNTIME_DIR" ]] ; then
+ # shellcheck disable=SC2155
+ # shellcheck disable=SC2046
+ export XDG_RUNTIME_DIR=$(mktemp -d /tmp/$(id -u)-runtime-dir.XXX)
+ logger 'xdg-runtime dir set NOW'
+else
+ logger 'xdg-runtime dir already set'
+fi
+
+if [[ ! "$DBUS_SESSION_BUS_ADDRESS" ]]; then
+ dbus-daemon --session --address=unix:path="$XDG_RUNTIME_DIR"/bus &
+ logger 'dbus session daemon started'
+else
+ logger 'dbus already running'
+fi
+
+if [[ ! $(pidof /usr/lib64/libexec/polkit-kde-authentication-agent-1) ]]; then
+ /usr/lib64/libexec/polkit-kde-authentication-agent-1 &
+ logger 'polit-kde started'
+else
+ logger 'polkit-kde already running'
+fi
+
+if [[ ! $(pidof mako) ]]; then
+ mako --config "${MAKOCONFIG}" &
+ logger 'mako started'
+else
+ logger 'mako already running'
+fi
+
+killall xdg-desktop-portal-hyprland
+killall xdg-desktop-portal-kde
+killall xdg-desktop-portal-gtk
+killall xdg-desktop-portal-gnome
+killall xdg-desktop-portal-wlr
+killall xdg-desktop-portal
+logger 'killed all xdg-desktop'
+
+sleep 1
+if [[ ! $(pidof xdg-desktop-portal-gtk) ]]; then
+ /usr/libexec/xdg-desktop-portal-gtk
+ logger 'problem: xdg-desktop-portal-gtk'
+fi
+
+sleep 2
+if [[ ! $(pidof xdg-desktop-portal) ]]; then
+ /usr/libexec/xdg-desktop-portal &
+ logger 'problem: xdg-desktop-portal'
+fi
+
+if [[ ! $(pidof pipewire) ]]; then
+ gentoo-pipewire-launcher &
+ logger 'gentoo-pipewire-launcher started'
+else
+ gentoo-pipewire-launcher restart &
+ logger 'gentoo-pipewire-launcher (re-)started'
+fi
+
+if [[ ! $(pidof waybar) ]]; then
+ waybar && logger 'waybar started' &
+fi
+
+if [[ ! $(pidof mpd) ]]; then
+ mpd && logger 'mpd started' &
+else
+ logger 'mpd already running'
+fi
+
+if [[ ! $(pidof mpd-mpris) ]]; then
+ mpd-mpris &
+ logger 'mpd-mpris started'
+else
+ logger 'mpd-mpris already running'
+fi
+
+if [[ ! $(pidof swww-daemon) ]]; then
+ swww init
+ logger 'swww-daemon started' &
+ # swww img ~/Bilder/Wallpapers/default.jpg &
+fi
+
+if [[ ! $(pidof wl-gammarelay-rs) ]]; then
+ /home/andy/.cargo/bin/wl-gammarelay-rs > /dev/null 2>&1 &
+ logger 'gammarelay started'
+fi
+if [[ ! -f "/tmp/autotemp.pid" ]]; then
+ kill "$(cat /tmp/autotemp.pid)" && logger "gammarelay-autotemp killed"
+ /home/andy/.config/hypr/scripts/gammarelay-autotemp.py > /dev/null 2>&1 &
+fi
+
+# if [[ ! $(pidof wlsunset) ]]; then
+# wlsunset -l 51.5 -L 6.7 > /dev/null 2>&1 &
+# logger 'wlsunset started'
+# else
+# logger 'wlsunset already running'
+# fi
+
+openrgb -p default &
+logger 'openrgb default theme loaded'
+kks new default & # kakoune default server
+
+if [[ $(pidof swww-daemon) ]]; then
+ killall wl-paste
+ wl-paste --type text --watch cliphist store &
+ wl-paste --type image --watch cliphist store &
+ logger 'clipboard manager loaded'
+fi
+
+sleep 2
+logger 'NIRI MAIN STARTUP END'
+logger '====================='
+
projects / dotfiles.git / commitdiff